To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

No Drive in All Ranges

Checks

Causes

Case Assembly (50)

    • Inspect for cracked or broken Case (50).
    • Inspect for stripped or sheared splines.
    • Inspect for binding Manual Shift Detent Lever Assembly (609).
    • Inspect for missing Manual Shift Shaft Pin (611).
    • Inspect for missing Manual Shaft Lever Pin (610).
    • Inspect for interference or binding Park Pawl Actuator Assembly (607).
    • Inspect for broken or disengaged 1-2-3-4 Clutch Backing Plate Retainer Ring (561).
    • Inspect for loose or damaged case bushing.
    • Inspect A/Trans Fluid Pump Seal Assembly (25) for damage.

Torque Converter (28)

    • Inspect for stripped or sheared splines on Turbine Shaft.
    • Inspect for missing Torque Converter to Flywheel bolts.
    • Inspect for damaged or disengaged Torque Converter Hub to Oil Pump Drive Gear.

Torque Converter Housing (208)

    • Inspect for stripped or sheared Differential Ring Gear splines.
    • Inspect for broken or disengaged Differential Ring Gear Retainer (206).
    • Inspect for loose, missing or broken Torque Converter and Differential Housing bolts (26).
    • Inspect for loose, missing or broken Fluid Pump bolts (200).

35R/456 Housing Assembly (516)

    • Inspect for damaged or broken Input Shaft Thrust Bearing Assembly (538).
    • Inspect for stripped or sheared splines on the Input Shaft to the 3-5 Reverse/4-5-6 Clutch Housing (516).

Oil Pump Assembly (201)

    • Inspect for fluid leaks / improper fluid level.
    • Inspect for leaking Fluid Outlet Seal Assembly (24).
    • Inspect for loose or missing Oil Pump Bolts (200).
    • Inspect for damaged, restricted or improperly installed Oil Filter Assembly (203).
    • Inspect for damaged or leaking Oil Filter Neck Seal.
    • Inspect for broken or seized Fluid Pump Drive Gear (315) and Fluid Pump Driven Gear (316).

Low & Reverse Clutch Assembly (543)

Inspect for stripped or sheared splines to the Reaction Carrier (567).

Input Carrier Assembly (570)

    • Inspect for stripped or sheared castle splines to ring gear.
    • Inspect for improperly installed carrier pinion gear pins.
    • Inspect for damaged or broken Pinion Gears.
    • Inspect for stripped or sheared splines on the Input Sun Gear (571).
    • Inspect for damaged or broken Output Internal Gear.
    • Inspect for broken or disengaged Output Internal Gear Retainer Ring.
    • Inspect for damaged or broken Input Carrier Thrust Bearing Assembly (568) and Output Carrier Thrust Bearing Assembly (573).
    • Inspect for damaged or broken Input Carrier Thrust Bearings (569, 572).

Reaction Carrier Assembly (567)

    • Inspect for stripped or sheared Reaction Carrier Assembly (567) splines.
    • Inspect for damaged or broken Input Carrier Thrust Bearings (568).
    • Inspect for damaged or broken Pinion Gear teeth.
    • Inspect for damaged or broken Reaction Internal Gear teeth.
    • Inspect for disengaged or broken Reaction Internal Gear retainer ring.

Reaction Sun Gear Assembly (566)

    • Inspect for damaged or broken weld at Sun Gear.
    • Inspect for loose or worn Reaction Sun Gear Assembly bushing.

Output Carrier Assembly (574)

    • Inspect for stripped or sheared splines to reaction internal ring gear.
    • Inspect for damaged or broken Input Sun Gear Thrust Bearings (572).
    • Inspect for damaged or broken Pinion Gear teeth.
    • Inspect for damaged or broken Input Carrier Thrust Bearings (573).
    • Inspect for broken or damaged Output Internal Gear.

Output Sun Gear Assembly (555)

    • Inspect for stripped or sheared Output Sun Gear Assembly (555) splines.
    • Inspect for broken Output Sun Gear Assembly (555) hub or weld.

Low-Reverse and 1-2-3-4 Clutch Housing (551)

Inspect for disengaged or broken 1-2-3-4 Clutch Piston Spring Retainer (554).

Drive Link Assembly (225)

    • Inspect for broken, worn or damaged Drive Link Assembly (225).
    • Inspect for broken, worn or damaged Drive Sprocket (224).
    • Inspect for broken, worn or damaged Driven Sprocket Assembly (229).
    • Inspect for broken Drive Gear Hub (222).

Differential Carrier Assembly (232)

    • Inspect for stripped or sheared splines on Differential Side Gear.
    • Inspect for stripped or sheared splines Final Drive Sun Gear (230).
    • Inspect for stripped or sheared splines Differential Carrier to PTU (AWD only).
    • Inspect for stripped broken or disengaged Final Drive Retainer (581).
    • Inspect for damaged or broken Pinion Gear teeth.
    • Inspect for damaged or broken Final Drive Rollers (585).
    • Inspect for broken, worn or damaged Final Drive Inner and Outer Thrust Washers (584).

Control Solenoid (w/Body and TCM) Valve Assembly

Check that the Manual Valve (432) is engaged with Manual Shift Detent Lever Assembly (609).

   


© Copyright Chevrolet. All rights reserved
   


© Copyright Chevrolet. All rights reserved