To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Drive Belt Tensioner Replacement

Removal Procedure
  1. Open the bonnet.
  2. Remove the generator and air conditioning compressor belt. Refer to Drive Belt Replacement .

    3. 2027566
  3. Remove the drive belt tensioner bolt (2).
  4. Remove the drive belt tensioner (1).

Installation Procedure
  1. Clean the drive belt tensioner thread.

    2. 2027566
  2. Install drive belt tensioner (1).

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the drive belt tensioner bolt (2) and tighten to 55 N·m (41 lb ft).
  4. Install the generator and air conditioning compressor belt. Refer to Drive Belt Replacement .
  5. Close the bonnet.
   


© Copyright Chevrolet. All rights reserved
   


© Copyright Chevrolet. All rights reserved