To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Transmission Fluid Cooler Inlet Pipe Replacement - LBN, LLW


2004195

Callout

Component Name

1

Transmission Fluid Cooler Pipe Nut

Caution: Refer to Fastener Caution in the Preface section.

Tighten
22 N·m (16 lb ft)

2

Sealing Washer

Tip
Remove and discard the sealing washer.

3

Transmission Fluid Cooler Inlet Hose

Procedure

  1. Disconnect the transmission line from the radiator and transmission. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
  2. Note the routing of the transmission line to ensure proper installation.
  3. Remove the transmission line from the clips securing the line to the transmission and fan shroud.
  4. Inspect the transmission fluid level. Refer to Transmission Fluid Level and Condition Check .
   


© Copyright Chevrolet. All rights reserved
   


© Copyright Chevrolet. All rights reserved