Orlando

Water Pump Pulley Installation

Note: Counterhold the crankshaft balancer. The belt has to be installed for this procedure.

1. Install the water pump pulley (2) to the water pump (3).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the 3 water pump pulley bolts (1) with locking compound. Refer to Adhesives, Fluids, Lubricants, and Sealers .
3. Tighten the 3 water pump pulley bolts (1) to 20 N·m (15 lb ft).