To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Oil Cooler Housing Installation - LDE, LED, LFJ, LXV, 2H0, LUW, LFH

  1. Clean the engine oil cooler housing to thermostat housing sealing surfaces.
  2. Install 2 NEW gaskets.

    3. 2026867
  3. Install the engine oil cooler inlet pipe (3).
  4. Install the engine oil cooler housing (1) and the 5 engine oil cooler bolts (2) and tighten to 25 N·m (18 lb ft).

    5. 2026830
  5. Install the thermostat housing coolant pipe (2) to the engine oil cooler housing.
  6. Install the 2 thermostat housing coolant pipe bolts (1) and tighten to 8 N·m (71 lb in).
   


© Copyright Chevrolet. All rights reserved
   


© Copyright Chevrolet. All rights reserved