Preliminary Procedures

1. Disconnect the negative cable from the battery. Refer to Battery Negative Cable Disconnection and Connection : without Start/Stop System .
2. Remove the inlet manifold brace. Refer to Inlet Manifold Replacement .

1

Starter and Alternator Positive Cable Nut

Caution: Refer to Fastener Caution in the Preface section.

Tighten
12.5 N·m (111 lb in)

2

Starter and Alternator Positive Cable

3

Starter Positive Cable Nut

4

Starter Positive Cable

5

Starter Negative Cable Nut

Tighten
12.5 N·m (111 lb in)

6

Starter Negative Cable

7

Starter Stud

Tighten
25 N·m (18 lb ft)

8

Starter Bolt

Tighten
25 N·m (18 lb ft)

9

Starter