Preliminary Procedure

Remove rear side door trim. Refer to Rear Side Door Trim Replacement .

1

Rear Side Door Check Link Bolt

Caution : Refer to Fastener Caution in the Preface section.

Procedure

1. Remove the rear side door water deflector. Refer to Rear Side Door Water Deflector Replacement .
2. Disconnect the door electrical connector.
3. Support the door before removing the hinge bolts.
4. With the aid of an assistant, remove the door.

Tighten
25 N·m (18 lb ft)

2

Rear Side Door Hinge Bolt (Qty: 2)

Tighten
25 N·m (18 lb ft)

3

Rear Side Door Hinge Bolt (Qty: 2)

Tighten
25 N·m (18 lb ft)

4

Rear Side Door

Procedure

1. Transfer all of the internal components.
2. Adjust the rear side door as needed. Refer to Rear Side Door Adjustment .