Preliminary Procedure

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection : without Start/Stop System .
2. Remove the radio control switch. Refer to Radio Control Switch Replacement .
3. Remove the instrument panel moulding. Refer to Instrument Panel Moulding Replacement - Passenger Side .
4. Remove the instrument panel lower moulding. Refer to Instrument Panel Lower Moulding Replacement .

1

Radio Bolt (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

2

Radio

Procedures

1. Disconnect electrical components.
2. After repairs, refer to Control Module References for programming and set up information.