Orlando

Radio Aerial Base Replacement

1. Lower headlining trim panel in the rear off vehicle. Refer to Headlining Trim Panel Replacement : without Sunroof  → with Sunroof .



2. Remove the radio aerial base bolt (1).



3. Remove the radio aerial base (1).
4. Disconnect the electrical connectors.

1. Connect the electrical connectors.



2. Install the radio aerial base (1).

Caution: Refer to Fastener Caution in the Preface section.




3. Install the radio aerial base bolt (1) and tighten to 10 N·m(89 lb in).
4. Install the headlining trim panel. Refer to Headlining Trim Panel Replacement : without Sunroof  → with Sunroof .