Orlando

Air Cleaner Inlet Duct Replacement

1. Remove the front bumper fascia. Refer to Front Bumper Fascia Removal and Installation .



2. Remove the inlet air duct bolt (2).
3. Remove the inlet air duct (1).

1. Install the inlet air duct (1).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the inlet air duct bolt (2) and tighten to 5 N·m (44 lb in).
3. Install the front bumper fascia. Refer to Front Bumper Fascia Removal and Installation .