To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Clutch Pedal Position Sensor Replacement

Removal Procedure

    2028127
  1. Disconnect the clutch pedal position sensor wiring harness plug.
  2. Remove the clutch pedal position sensor bolt (2).
  3. Remove the clutch pedal position sensor (1).

Installation Procedure

    2028127
  1. Install the clutch pedal position sensor (1).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the clutch pedal position sensor bolt (2) and tighten to 3 N·m(27 lb in).
  3. Connect the clutch pedal position sensor wiring harness plug.
  4. Learn clutch pedal position sensor.
    • D-20 (MSA), refer toClutch Pedal Position Sensor Learn
    • F-40 (MYJ), refer toClutch Pedal Position Sensor Learn
   


© Copyright Chevrolet. All rights reserved
   


© Copyright Chevrolet. All rights reserved