Preliminary Procedures

1. Remove the front bumper fascia. Refer to Front Bumper Fascia Removal and Installation .
2. Remove the charge air cooler inlet and outlet hose from the charge air cooler. Refer to Charge Air Cooler Inlet Hose Replacement : 2.0L Diesel LNP and Charge Air Cooler Outlet Hose Replacement : LNP and Manual Transmission  → LNP and Automatic Transmission .

1

Power Steering Fluid Cooling Pipe Bracket Bolt

Caution: Refer to Fastener Caution in the Preface section.

Procedure

Remove bolt if power steering fluid cooling pipe is equipped.

Tighten
9 N·m (80 lb in)

2

Radiator Lower Bracket Bolt (Qty: 2)

Procedure

Secure the radiator.

Tighten
22 N·m (16 lb ft)

3

Radiator Lower Bracket