Orlando

Camshaft Timing Chain Installation

Note: The marks on the timing chain are asymmetric on the timing chain.

1. Install the camshaft timing chain (1).



2. The mark on the inlet camshaft gear (1) must match with the mark on the timing chain (2).



3. Install the timing chain guide (2).
4. Apply safety agent to the timing chain damper retaining bolt (3).

Caution: Refer to Fastener Caution in the Preface section.

5. Install 2 retaining bolts (3) from the timing chain guide (2) and tighten to 25 N·m (18 lb ft).



6. The mark on the inlet crankshaft gear (1) must match with the mark on the timing chain (2).



7. Install the timing chain damper (4).
8. Apply safety agent to the timing chain damper retaining bolt (3).
9. Install bolt (3) to the timing chain damper (4) and tighten to 25 N·m (18 lb ft).