Orlando

Transmission Mount Bracket Replacement - Rear - LNP

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Using a suitable jack stand, support the rear of the transmission.



3. Remove the rear transmission mount bracket to rear mount through bolt (1).



4. Remove the 3 rear transmission mount bracket to transmission bolts (1).
5. Remove the rear transmission mount bracket (2).

1. Install the rear transmission mount bracket (2).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the 3 rear transmission mount bracket to transmission bolts (1) and tighten to 100 N·m (74 lb ft).



3. Install the rear transmission mount bracket to rear mount through bolt (1) and tighten to 100 N·m (74 lb ft).
4. Remove the jack stand.
5. Lower the vehicle.