Orlando

Transmission Front Mount Replacement

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Support the front of the transmission using a suitable jack stand.



3. Remove the transmission front mount through bolt (1).



4. Remove the transmission front mount bolts (1).
5. Remove the transmission front mount (1).

1. Install the transmission front mount (2).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the transmission front mount bolts (1) and tighten to 62 N·m (46 lb ft).



3. Install the transmission front mount through bolt (1) and tighten to 100 N·m (74 lb ft).
4. Remove the jack stand.
5. Lower the vehicle.