Orlando

Camshaft Position Sensor Replacement

1. Remove the engine sight shield. Refer to Engine Sight Shield Replacement .



2. Disconnect the camshaft position sensor wiring harness plug.
3. Remove the camshaft position sensor bolt (3) and the camshaft position sensor (2).
4. Remove the camshaft position sensor gasket (1).

1. Install the camshaft position sensor (2) with a NEW camshaft position sensor gasket (1).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the camshaft position sensor bolt (3) and tighten to 10 N·m (89 lb in).
3. Connect the camshaft position sensor wiring harness plug.
4. Install the engine sight shield. Refer to Engine Sight Shield Replacement .