Orlando

Manual Gearbox Gear Lever and Selector Lever Cable Adjustment

DT-527-A Adjuster

For equivalent regional tools, refer to Special Tools .

1. Remove front floor front console. Refer to Front Floor Front Console Replacement .



2. Remove the gear lever and selector lever cable adjust locks (1).



3. Lock the transmission control with locking retainer (1).



4. Block transmission control housing (2) using DT-527-A adjuster (1)

1. Install the gear lever and selector lever cable adjust locks (1).
2. Remove the locking retainer from the transmission control.
3. Remove the DT-527-A adjuster from the shift control housing.
4. Install front floor front console. Refer to Front Floor Front Console Replacement .