Orlando

Manual Transmission Shift Lever and Selector Lever Cable Replacement

DT-6042-A Dismantling Key

For equivalent regional tools, refer to Special Tools .

1. Remove battery tray. Refer to Battery Tray Replacement .



2. Remove shift lever and selector lever cable (2) from transmission control housing (3) and from shift lever and selector lever bracket (1) using DT-6042-A dismantling key.
3. Remove front floor front console. Refer to Front Floor Front Console Replacement .



4. Remove the gear lever and selector lever cable grommet (1) from the bulkhead.



5. Unlock gear lever and selector lever cable adjust locks (1).
6. Clip shift lever and selector lever cable (3) out of transmission control lever housing (2).
7. Remove the gear lever and selector lever cables.

Note: Do not lock yet.

1. Slide shift lever and selector lever cable (3) into shift lever and selector lever cable adjust locks (1).
2. Clip shift lever and selector lever cable into transmission control lever housing (1).



3. Install shift lever and selector lever cable (1) from inside the vehicle.
4. Install shift lever and selector lever cable to bulkhead.
5. Check for correct fit.



6. Install gear lever and selector lever cable (2) to gear lever and selector lever cable bracket (1).
7. Install gear lever and selector lever cable to transmission control housing (3).
8. Adjust the gear lever and selector lever cables. Refer to Manual Gearbox Gear Lever and Selector Lever Cable Adjustment .
9. Install front floor front console. Refer to Front Floor Front Console Replacement .
10. Install the battery tray. Refer to Battery Tray Replacement .