Preliminary Procedure

Drain the transmission. Refer to Transmission Fluid Replacement .

1

Control Valve Body Cover Bolt (Qty: 13)

Caution: Refer to Fastener Caution in the Preface section.

Tip
The 4 control valve body cover bolts which secure the stiffener are of different lengths. Be sure to position them in the right places.

Tighten
13 N·m (115 lb in)

2

Stiffener

Tip
Do not separate the stiffener from the control valve body cover with a screwdriver.

3

Control Valve Body Cover

Procedure

Remove the magnet.

Tip
The coat of sealant should be wide and thick, approximately 3 mm (0.12 in) in width and 1.5 mm (0.06 in) thick.