To the top of the document
Spark
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Transmission Control Replacement

Removal Procedure
  1. Remove the front floor console. Refer to Front Floor Console Replacement .

    2. 2308281
  2. Remove the gear lever, selector lever cable U-clip (1) and pin (2).

    3. 2308288
  3. Disconnect the gear lever and selector lever cable ends (1).
  4. Remove the gear lever and selector lever cable socket (2) from the transmission control lever base.

    5. 2308296
  5. Remove the transmission control bolts (1) and nuts (2).
  6. Remove the transmission control .

Installation Procedure

    2308319
  1. Install the transmission control .
  2. Connect the gear lever cable end.
  3. Install the gear lever cable U-clip (1).
  4. Install the gear lever cable socket (2) to the transmission control lever base.

    5. Caution: Refer to Fastener Caution in the Preface section.


    2308323
  5. Install the transmission control bolts (1) and nuts (2), and tighten to 6 N·m (53 lb in).
  6. Install the selector lever cable socket (3) to the transmission control lever base.
  7. Connect the selector lever cable end.
  8. Install the selector lever cable pin (4).
  9. Install the front floor console. Refer to Front Floor Console Replacement .
   


© Copyright Chevrolet. All rights reserved