Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the front wheel drive shaft from the transmission. Refer to Front Wheel Drive Shaft Replacement .

1

Left Front Wheel Drive Shaft Oil Seal

Procedure

1. Remove the left wheel drive shaft oil seal using the DT-7004 slide hammer and the DT-586 universal seal removal tool.
2. Coat NEW left front wheel drive shaft oil seal with transmission fluid.
3. Install the NEW left front wheel drive shaft oil seal using the DT-50181 oil seal installation tool and hammer.

Tip
Do not reuse the wheel drive shaft oil seal.

Special Tools

Refer to Special Tools for the equivalent local tools.