Preliminary Procedures

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the front wheel drive shaft from the transmission. Refer to Front Wheel Drive Shaft Replacement .

1

Right Front Wheel Drive Shaft Oil Seal

Procedure

1. Remove the right wheel drive shaft oil seal using the DT-7004 slide hammer with the DT-586 universal seal removal tool.
2. Coat NEW Right front wheel drive shaft oil seal with transmission fluid.
3. Install a NEW right front wheel drive shaft oil seal using the DT-49088 oil seal installation tool and hammer.

Tip
Do NOT reuse the front wheel drive shaft oil seal.

Special Tools

Refer to Special Tools for the equivalent local tools.