Spark

Transmission Mount Replacement - Left Side — with EN-50176

Special Tools

For equivalent regional tools, refer to Special Tools .

1. Remove the battery tray. Refer to Battery Tray Replacement .
2. Install the EN-49802 cradle supporter , EN-50176 powertrain support pallet and EN-50177 cradle supporter holder. Refer to Engine/Transmission Mounting : with CH-49289 and CH-49290 → with EN-49802 and EN-50176 .



3. Remove the left transmission mount bolt (1) from the transmission mount bracket.
4. Remove the left transmission mount nut (2) from the transmission mount bracket.



5. Remove the left transmission mount to body bolts (1).
6. Remove the transmission mount (2) from the vehicle.

1. Install the transmission mount (2) to the vehicle.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the transmission mount to body bolts (1) and tighten to 50 N·m (37 lb ft).



3. Install the left transmission mount nut (2) onto the transmission mount bracket and tighten to 75 N·m (55 lb ft).
4. Install the left transmission mount bolt (1) onto the transmission mount bracket and tighten to 75 N·m (55 lb ft).
5. Remove the EN-49802 cradle supporter , EN-50176 powertrain support pallet and EN-50177 cradle supporter holder. Refer to Engine/Transmission Mounting : with CH-49289 and CH-49290 → with EN-49802 and EN-50176 .
6. Install the battery tray. Refer to Battery Tray Replacement .