To the top of the document
Spark
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Selector fork Cleaning and Inspection


2308440

Measure the end thickness of selector fork and replace if necessary.

Specifications

    • The standard selector fork end thickness for the low speed selector fork is 8.7 mm (0.343 in).
    • The selector fork end thickness limit for the low speed selector fork is 8.56 mm (0.337 in).
    • The standard selector fork end thickness for the high speed selector fork is 7.8 mm (0.307 in).
    • The selector fork end thickness limit for the high speed selector fork is 7.66 mm (0.302 in).
    • The standard selector fork end thickness for the fifth gear selector fork is 7.8 mm (0.307 in).
    • The selector fork end thickness limit for the fifth gear selector fork is 7.66 mm (0.302 in).
   


© Copyright Chevrolet. All rights reserved