Preliminary Procedures

1. Remove the instrument panel compartment. Refer to Instrument Panel Compartment Replacement .
2. Remove the radio. Refer to Radio Replacement .

1

Keyless Entry Control Module Nut (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
8 N·m (71 lb in)

2

Keyless Entry Control Module

Procedure

1. Disconnect the electrical and aerial cable connectors.
2. Remove the keyless entry control module and bracket assembly.
3. Remove the keyless entry control module from the bracket.