Warning: When a tailgate hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Preliminary Procedure

Release the liftgate strut from the liftgate. Refer to Liftgate Strut Replacement .

1

Tailgate Hinge Bolt (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Procedure

1. Disconnect the electrical connector.
2. Pull the tailgate wiring grommet, the connectors, and the rear washer hose out of the body.
3. Mark the location of the liftgate hinges to the body with a grease pencil.

Tighten
20 N·m (15 lb ft)

2

Liftgate

Procedure

1. Transfer components as necessary.
2. Adjust liftgate as needed. Refer to Liftgate Adjustment .