Spark

Air Conditioning (AC) Refrigerant Filter Replacement

Special Tools

GE 39400-A Halogen Leak Detector

For equivalent regional tools, refer to Special Tools .

1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging .
2. Remove the front bumper fascia opening lower cover. Refer to Front Bumper Fascia Opening Lower Cover Replacement .




Note: Cap all A/C components immediately to prevent system contamination.

3. Remove the air conditioning receiver and dehydrator plug (4).
4. Remove and discard the sealing washers (3).
5. Remove the refrigerant filter (2) from the condenser (1).

1. Uncap A/C components.
2. Install new sealing washers (3). Refer to Air Conditioning O-Ring Seal Replacement .



3. Install the refrigerant filter (2) into the air conditioning condenser (1).
4. Install the air conditioning receiver and dehydrator plug (4).
5. Install the front bumper fascia opening lower cover. Refer to Front Bumper Fascia Opening Lower Cover Replacement .
6. Evacuate and charge the refrigerant system. Refer to Refrigerant Recovery and Recharging .
7. Leak test the fittings using the GE 39400-A detector.