Spark

Air Conditioning Refrigerant Service Valve Core Replacement

Special Tools

For equivalent regional tools, refer to Special Tools .

1. Recover the refrigerant. Refer to Refrigerant Recovery and Recharging .



2. Remove the service port valve core (1) using the GE-46246 remover.

Caution: Refer to Fastener Caution in the Preface section.




1. Install the service port valve core (1) using the GE-46246 remover and tighten to 0.4 N·m (4 lb in).
2. Evacuate and charge the refrigerant system. Refer to Refrigerant Recovery and Recharging .
3. Leak test the fittings using the GE-39400-A detector.