Preliminary Procedure

Begin at the rear window and lift the moulding from the ditch, disengaging the moulding from the four integral ditch retaining clips.

1

Roof Panel Joint Finish Moulding Assembly

Procedure

1. Begin at the front windshield, tuck the finish moulding tab to the front roof header.
2. Using a roller-type tool, roll the ditch moulding into the ditch securing the moulding to each of the four integral ditch retainers.
3. Inspect the levelness of the ditch moulding to the roof panel.
4. If not level, roll the area again to achieve a smooth fit to the ditch.