To the top of the document
Spark
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Mode Valve Link Replacement -- Left Hand Drive

Removal Procedure
  1. Remove the left side floor air outlet duct. Refer to Floor Air Outlet Duct Replacement - Left Side : Right Hand Drive → Left Hand Drive .
  2. Remove the mode valve actuator. Refer to Mode Valve Actuator Replacement : Right Hand Drive → Left Hand Drive .

    3. 2309298
  3. Remove the mode valve link bracket screws (1).
  4. Remove the mode valve link bracket (2).

    5. 2309299
  5. Remove the mode valve link screw (1).
  6. Remove the mode valve link (2).

Installation Procedure

    2309299
  1. Install the mode valve link (2).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the mode valve link screw and tighten to 1.2 N·m (11 lb in).

    3. 2309298
  3. Install the mode valve link bracket (2).
  4. Install the mode valve link bracket screws (1) and tighten to 1.2 N·m (11 lb in).
  5. Install the mode valve actuator. Refer to Mode Valve Actuator Replacement : Right Hand Drive → Left Hand Drive .
  6. Install the left side floor air outlet duct. Refer to Floor Air Outlet Duct Replacement - Left Side : Right Hand Drive → Left Hand Drive .
   


© Copyright Chevrolet. All rights reserved