Spark

Intermediate Steering Shaft Replacement

1. Turn the steering wheel to the straight forward position and support it from movement.



2. Remove the 2 intermediate steering shaft bolts (1).



3. Remove the intermediate steering shaft.

1. Install the intermediate steering shaft.

Caution: Refer to Fastener Caution in the Preface section.





Note: The recess (2) of the fine toothing in the universal joint have to align precisely with the recess (1) of the fine toothing on the steering pinion. The bore in the universal joint have to align with the groove on the steering pinion (3).




2. Install the 2 intermediate steering shaft bolts (1) and tighten the intermediate steering shaft bolts to 25 N·m (18 lb ft).