Spark

Low Clutch Disassemble

Special Tools

DT-47524 Low Clutch Spring Compressor

For equivalent regional tools, refer to Special Tools .

1. Remove the snap ring (1).
2. Remove the retaining plate (2), 7 friction plates (3), 7 separator plates (4) and the cushion plate (5) from the low clutch drum (6).




Note: Do not apply undue stress to the cancel cover.

3. Depress the cancel cover (2) using DT-47524 compressor (4) and remove the circlip (1).
4. Remove the cancel cover and the return spring (3).




Note: Air must be blown gradually at low pressure so as not to tilt low clutch piston. If the low clutch piston is hard to remove by blowing air with an air gun (1), pull it out using pliers.

5. Blow air into the oil inlet of the low clutch drum (2) to drive out the low clutch piston (3).
6. Remove the low clutch piston and O-rings (4).