To the top of the document
Spark
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Wiring Harness Replacement

Removal Procedure
  1. Remove the control valve body. Refer to Control Valve Body Replacement .

    2. 2309008

    Note: Do not pull on the harness when removing the connector.

  2. While pushing the tabs (2), pull the solenoid connector (1) out from the case.
  3. Remove the wiring harness assembly from the transmission case.

Installation Procedure

    2309066
  1. Install the wiring harness assembly.
  2. Install the solenoid connector (1) in the transmission case.
  3. Install the control valve body. Refer to Control Valve Body Replacement .
   


© Copyright Chevrolet. All rights reserved