Spark

Crankshaft Front Oil Seal Replacement

Special Tool

J 50172 Crankshaft Front Oil Seal Installer

For equivalent regional tools, refer to Special Tools .

1. Remove the crankshaft balancer. Refer to Crankshaft Balancer Replacement .



2. Use a flat-bladed tool to remove the seal from the front cover.

Note: Use the J 50172 crankshaft front oil seal installer in order to install the crankshaft front oil seal to the engine front cover.

1. Install the new crankshaft front oil seal to crankshaft with J 50172 crankshaft front oil seal installer (1).
2. Tighten crankshaft bolt (2) till the J 50172 crankshaft front oil seal installer seats on the engine front cover.
3. Remove the crankshaft bolt (2).
4. Install the crankshaft balancer. Refer to Crankshaft Balancer Replacement .