Spark

Oil Pump Assemble

1. Install the oil relief components to oil pump housing (1).
2. Install the clip (2).

Note: The dimpled surface must be face-up in the pump body.

3. Install the inner oil pump drive gear and the outer oil pump driven gear in the engine front cover in the same orientation as removed.
4. Install the oil pump housing (1) to the engine front cover.

Caution: Refer to Fastener Caution in the Preface section.

5. Install the oil pump hosing to engine front cover retaining bolts (3) and tighten to 10 N·m (7.4 lb ft).