To the top of the document
Spark
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Crankshaft Balancer Installation

Special Tools

EN 50050 Crankshaft Locking Device

For equivalent regional tools, refer to Special Tools .


    2308806
  1. Install the EN 50050 crankshaft locking device . Lock the flywheel via the starter ring gear.

    2. 2308810

    Caution: Refer to Fastener Caution in the Preface section.

    Note: When installing the crankshaft balancer, the cam and the groove must align.

  2. Install the crankshaft balancer (2) to the crankshaft and tighten the bolt (1) to 85 N·m (15 lb ft).
   


© Copyright Chevrolet. All rights reserved