Warning: Refer to SIR Warning in the Preface section.

Warning: Refer to SIR Inflator Module Handling and Storage Warning in the Preface section.

Warning: Following the deployment of a side impact air bag, inspect the following parts for damage. Replace these parts if necessary:

Preliminary Procedure

1. Disable the SIR system. Refer to SIR Disabling and Enabling
2. Remove centre pillar lower garnish moulding. Refer to Center Pillar Lower Trim Panel Replacement .

1

Inflatable Restraint Side Impact Sensor Screw

Caution: Refer to Fastener Caution in the Preface section.

Tighten
7.5 N·m (66 lb in)

2

Inflatable Restraint Side Impact Sensor Assembly

Procedure

1. Disconnect electrical connector.
2. Loosen the bolts and slide the sensor out of the keyhole slots.

Tip
The bolt is integral to the sensor assembly, DO NOT remove separately.