Preliminary Procedure

Remove the front bumper fascia. Refer to Front Bumper Fascia Replacement .

1

Headlamp Screw (Qty: 3)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (22 lb in)

2

Headlamp Assembly

Procedure

1. Pull the headlamp assembly forward far enough to access the electrical connection.
2. Disconnect the headlamp electrical connector from the forward lamp harness connector.
3. Remove the headlamp assembly.
4. Aim the headlamps after installation. Refer to Headlamp Aiming .