Odometer Trip/Reset Switch Inoperative
Diagnostic Instructions
Circuit/System Description
The instrument cluster displays the travelled distance based on the information from the engine control module (ECM). The ECM converts the data from the vehicle speed sensor to a distance signal. The ECM sends the distance information via a serial date circuit to the cluster. The cluster displays the vehicle odometer and trip odometer. The instrument cluster detects the activation of the trip reset switch and a press and hold of the trip reset switch resets the trip odometer information to zero.
Reference Information
Schematic Reference
Instrument Cluster Schematics
Connector End View Reference
Component Connector End Views
Description and Operation
Instrument Cluster Description and Operation
Electrical Information Reference
Scan Tool Reference
Inflatable Restraint Sensing and Diagnostic Module Scan Tool Information
Circuit/System Verification
Ignition ON, verify the odometer trip reset switch resets the trip odometer display when the switch is pressed.
| ⇒ | If the odometer trip reset switch does not reset the trip odometer, replace the Instrument Cluster. |
Repair Instructions
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Control Module References
| © Copyright Chevrolet. All rights reserved |
