To the top of the document
Captiva
To Previous PageTo Next Page
GMDE Start PageLoad static TOCLoad dynamic TOCHelp?

SECTION 6

APPEARANCE

1. INSPECT CONDITION AND PERFORM DETAIL OPERATION

2. CHECK FOR PROPER ASSEMBLY, FIT AND RETENTION OF PARTS AND COMPONENTS

Check for proper assembly, fit and retention of following parts and component.

uzw8071a
Display graphicTranslations of text in graphics


3. EXTERIOR FINISH

Check exterior and perform the remedial actions if defects are found, and then finish work is required as follows.

4. INTERIOR TRIM AND CARPETS PROTECTIVE COVERINGS

Inspect the followings clean, as required.

5. SPARE WHEEL, JACK AND VEHICLE TOOLS

Check for the spare wheel, jack and vehicle tools which are accommodated in the luggage/load compartment. The spare wheel is retained by a bolt under a floor cover. The jack and vehicle tools are located at the very rear of spare wheel compartment.
DESCRIPTION
Spare wheel
Bag - Tool
Wrench - Wheel nut
Tool - Spanner
Jack
Jack Lever
Tool - Driver

pdisec06p3b
Display graphicTranslations of text in graphics


6. BATTERY

Check the battery condition through the hydrometer(test indicator) in the top of the battery.

pdisec06p3a
Display graphicTranslations of text in graphics



pdisec06p3c
Display graphicTranslations of text in graphics


To Previous PageTo Next Page


© Copyright Chevrolet Europe. All rights reserved