To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Camshaft Cover Disassemble

Left Camshaft Cover


    2403551
  1. Remove and discard the left camshaft cover bolt grommets (1).

  2. 2403560
  3. Remove the fuel injector sight shield ball stud (1).

  4. 2413113

    Note: The oil filler tube should NOT be removed as it will crack the camshaft cover. If the oil filler tube is damaged or leaking the tube, O-ring, AND camshaft cover must be replaced. The only separately serviceable components are the oil filler cap and oil filler cap O-ring.

  5. Remove the oil fill cap (1) and oil fill cap O-ring (2).
  6. Discard the O-ring (2).

  7. 1992532

    Note: Do not reuse the camshaft cover gasket and spark plug shield tube seals.

  8. Remove and discard the left camshaft cover gasket.

  9. 1992534
  10. Remove and discard the left spark plug shield tube seals.

Right Camshaft Cover


    1833742
  1. Remove and discard the right camshaft cover bolt grommets.

  2. 1833744

    Note: Do not reuse the camshaft cover gasket and spark plug shield tube seals.

  3. Remove and discard the right camshaft cover gasket.

  4. 1833747
  5. Remove and discard the right spark plug shield tube seals.
   


© Copyright Chevrolet. All rights reserved