3-5 Reverse Clutch Assembly
|
| • | Inspect for damaged, stripped or sheared splines on 3-5 Reverse Clutch Plates (507-509), Backing Plate (510) |
| • | Inspect for sheared or stripped splines on 3-5 Rev/4-5-6 Housing (516) to Turbine Shaft (517) |
| • | Inspect for damage, improper surface finish, porosity, deformed or unbalanced 3-5 Rev/4-5-6 Housing (516) |
| • | Inspect for damaged, worn, loose or seized hub bushing in the 3-5 Rev/4-5-6 Housing |
| • | Inspect for broken, porous or improper surface finish or plugged oil passages of the 3-5 Rev/4-5-6 Housing (516) |
| • | Inspect for failure of the Input Shaft Thrust Bearing (538) |
| • | Inspect for disengaged or broken 3-5 Reverse Clutch Backing Plate (511) |
| • | Inspect for damaged, worn or leaking 3-5 Reverse Clutch Piston Seals (504-506) |
| • | Inspect for damaged or broken 3-5 Rev/4-5-6 Clutch Housing (516) |
| • | Inspect for warped, damaged, improper surface finish or debonding 3-5 Reverse Clutch Piston (502) |
| • | Inspect for broken or fatigued 3-5 Reverse Clutch Spring (503) |
| • | Inspect for disengaged or broken Speed Sensor Reluctor Retainer (500) |
| • | Inspect for worn, broken or damaged Speed Sensor Reluctor Wheel (501) |
|
