1

1-2-3-4 Clutch Piston

Tip
DT-47798 seal protector prevents the piston seal lip from damage during installation. Apply a thin coat of ATF to the I.D. of DT-47798 seal protector to ease the installation of the piston.

Special Tool

DT-47798 Seal Protector

For equivalent regional tools, refer to Special Tools .

2

1-2-3-4 Clutch Spring

3

1-2-3-4 Clutch Spring Retainer

Caution: Regulate the air pressure to 40 psi maximum. High pressure could cause the piston to over travel and damage the piston seals.

Tip

1. Place the retainer onto DT-47799-1 which is part of DT-47799 spring compressor. Compressing the spring using DT-47799-2 which is part of DT-47799 spring compressor, will install the retainer into the retainer groove.
2. Apply shop air to the clutch fluid feed hole in the clutch housing to verify proper piston operation.

Special Tool

DT-47799 Clutch Piston Spring Compressor

For equivalent regional tools, refer to Special Tools .

1

Low and Reverse Clutch Piston

Tip
DT-47807 seal protector prevents the piston seal lip from damage during installation. Apply a thin coat of ATF to the I.D. of DT-47807 seal protector to ease the installation of the piston.

Special Tool

DT-47807 Clutch Piston Seal Protector

For equivalent regional tools, refer to Special Tools .

2

Low and Reverse Clutch Spring

3

Low and Reverse Clutch Spring Retainer

Caution: Regulate the air pressure to 40 psi maximum. High pressure could cause the piston to over travel and damage the piston seals.

Tip

1. Place the retainer onto DT-47794-1 which is part of DT-47794 spring compressor. Compressing the spring using DT-47794-2 which is part of DT-47794 spring compressor, will install the retainer into the retainer groove.
2. Apply shop air to the clutch fluid feed hole in the clutch housing to verify proper piston operation.

Special Tool

DT-47794 Spring Compressor

For equivalent regional tools, refer to Special Tools .