Cruze

Lubrication Description - LDE, LED, LFJ, LXV, 2H0, LUW

Oil is applied under pressure to the crankshaft, connecting rods, camshaft adjuster, camshaft bearing surfaces and valve tappets. All other moving parts are lubricated by gravity flow or splash. Oil enters the rotor type oil pump through a fixed inlet screen. The oil pump is driven by the crankshaft. The oil pump body is within the engine front cover. The pressurised oil from the pump passes through the oil cooling system and the oil filter. The oil filter is integrated with the oil cooling system housing that is connected to the front of the engine block. The oil filter is a disposable cartridge type. A by-pass valve in the filter cap allows continuous oil flow in case the oil filter should become restricted. The connecting rod bearings are oiled by constant oil flow passages through the crankshaft connecting the main journals to the rod journals. A groove around each upper main bearing furnishes oil to the drilled crankshaft passages. The pressurised oil passes through the cylinder head restrictor orifice into the cylinder head and then into each camshaft feed gallery. An engine oil pressure switch or sensor is installed at the end. Oil returns to the sump through passages cast into the cylinder head.