To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Heater Core Replacement

Removal Procedure
  1. Drain the cooling system. Refer to Cooling System Draining and Filling .
  2. Remove Instrument panel lower trim panel - left side. Refer to Instrument Panel Lower Trim Panel Replacement - Left Side .
  3. Remove instrument outer trim cover - left side. Refer to Instrument Panel Outer Trim Cover Replacement - Left Side .
  4. Remove instrument panel lower trim pad cover. Refer to Instrument Panel Lower Trim Pad Cover Replacement : without Knee Airbag .

    5. 2027264
  5. Remove instrument panel bolt (1).

    6. 2027271
  6. Remove heater core cover bolt (1) and heater core cover (2).

    7. 2027273
  7. Remove the 2 heater core clamps (2).
  8. Remove the 2 heater core tubes (3).
  9. Remove the heater core (1).
  10. Change the 2 heater core tube sealing rings.

Installation Procedure

    2027273
  1. Install the heater core (1).
  2. Install the 2 heater core tubes (3).
  3. Tighten the 2 heater core clamps (2).

    4. 2027271
  4. Install heater core cover bolt (1) and heater core cover (2).

    5. 2027264
  5. Install instrument panel bolt (1).
  6. Install instrument panel lower trim pad cover - left side. Refer to Instrument Panel Lower Trim Pad Cover Replacement : without Knee Airbag .
  7. Install instrument outer trim cover - left side. Refer to Instrument Panel Outer Trim Cover Replacement - Left Side .
  8. Install instrument panel lower inner panel. Refer to Instrument Panel Lower Trim Panel Replacement - Left Side .
  9. Bleed the cooling system. Refer to Cooling System Draining and Filling .
   


© Copyright Chevrolet. All rights reserved