Preliminary Procedures

Remove the rear compartment lid inner panel trim. Refer to Rear Compartment Lid Inner Panel Trim Replacement .

1

Reverse Lamp Nut (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
5 N·m (44 lb ft)

2

Reverse Lamp Assembly

Warning: Refer to Glass and Sheet Metal Handling Warning in the Preface section.

Warning: Refer to Halogen Bulb Warning in the Preface section.

Procedure

1. Disconnect electrical connectors.
2. Reach inside the rear compartment lid inner panel and remove the lower and upper retainer nuts securing the lamp assembly to the outer rear compartment lid panel.
3. Push the inside edge of the lamp assembly outward from the rear outer compartment lid panel.
4. Remove and transfer the bulb socket from the reverse lamp assembly.