Cruze

Throttle Body Heater Outlet Hose Replacement - LDE, LXV, 2H0, and LUW

1. Open the bonnet.
2. Place a collection basin under the vehicle.



3. Loosen the clamp and disconnect the throttle body heater outlet hose (2) from the radiator surge tank (1).
4. Disconnect the throttle body heater outlet hose connector from the throttle body (3).
5. Remove the throttle body heater outlet hose (2).

1. Install the throttle body heater outlet hose (2).
2. Connect the throttle body heater outlet hose connector to the throttle body (3)
3. Connect the throttle body heater outlet hose (2) to the radiator surge tank (1) and install the clamp.



4. Top off the coolant by filling to the bottom line (black arrow) on the coolant surge tank (1), if necessary.
5. Close the bonnet.