Cruze |
||||||||
|
|
|
|||||||
Step | Action | Yes | No | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
1 | Did you review the Steering Wheel and Column Description and perform the necessary inspections? | Go to Step 2 | |||||||||
2 | Verify that noise is present in the steering column during operation. Is noise present in the steering column during operation? | Go to Step 3 | System OK | ||||||||
3 | Inspect the steering column mounting features for the following conditions:
Are the steering column mounting features loose? | Go to Step 9 | Go to Step 4 | ||||||||
4 | Inspect the SIR/SRS coil for noise. Is the SIR/SRS coil noisy? | Go to Step 10 | Go to Step 5 | ||||||||
5 | Inspect the lock plate retaining ring for correct installation. Is the lock plate retaining ring installed incorrectly? | Go to Step 11 | Go to Step 6 | ||||||||
6 | Inspect the steering column upper and lower bearings for the following conditions:
Are the bearings in need of repair or replacement? | Go to Step 12 | Go to Step 7 | ||||||||
7 | Does the tilt joint need to be lubricated? | Go to Step 13 | Go to Step 8 | ||||||||
8 |
Note: This is best evaluated while driving the vehicle, turning the steering and applying the brake pedal. Inspect the intermediate steering shaft for noise. is the intermediate steering shaft noisy? | Go to Step 14 | Go to Step 15 | ||||||||
9 |
Note: If the steering column mounting is damaged or sheared, the steering column will need to be replaced. Refer to Steering Column Replacement : Right Hand Drive → Left Hand Drive . Tighten the steering column mounting fastener to specifications. Refer to Fastener Tightening Specifications . Did you complete the repair? | Go to Step 15 | — | ||||||||
10 | Replace the SIR/SRS coil. Refer to Steering Wheel Inflatable Restraint Module Replacement . Did you complete the repair? | Go to Step 15 | — | ||||||||
11 | Install the lock plate retaining ring correctly. Did you complete the repair? | Go to Step 15 | — | ||||||||
12 |
Note: If the steering column upper and/or lower bearings are not serviceable, the steering column will need to be replaced. Refer to Steering Column Replacement : Right Hand Drive → Left Hand Drive . Replace the upper and/or lower bearing, if serviceable. Did you complete the repair? | Go to Step 15 | — | ||||||||
13 | Lubricate the tilt joint. Did you complete the repair? | Go to Step 15 | — | ||||||||
14 | Replace the appropriate intermediate steering shaft component. Refer to Intermediate Steering Shaft Replacement . Did you complete the repair? | Go to Step 15 | — | ||||||||
15 | Operate the system in order to verify the repair. Did you correct the condition? | System OK | Go to Step 3 |
| © Copyright Chevrolet. All rights reserved |
