Preliminary Procedures

1. Remove control lever knob. Refer to Transmission Control Lever Knob Replacement .
2. Remove front floor console. Refer to Front Floor Console Replacement .

1

Transmission Control Fastener (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Procedure

1. Unclip wiring harness and disconnect electrical connector transmission control.
2. Disconnect range selector lever cable. Refer to Range Selector Lever Cable Replacement .
3. Adjust range selector lever cable. Refer to Range Selector Lever Cable Adjustment .

Tighten
9 N·m (80 lb in)

2

Transmission Control