Cruze

Handbrake Cable Replacement -- Conventional Handbrake

Warning: Refer to Brake Dust Warning in the Preface section.

1. Remove the front floor console. Refer to Front Floor Console Replacement .
2. Remove the rear seat cushion. Refer to Rear Seat Cushion Replacement .
3. Remove the centre pillar lower garnish moulding. Refer to Centre Pillar Lower Garnish Moulding Replacement .



4. Partially remove the rear floor carpet (1).



5. Remove the parking brake cable (2) from the parking brake lever (1).
6. Remove the parking brake cable (2) from the parking brake cable bracket (3).



7. Remove the parking brake cable clip (1).
8. Remove the parking brake cable grommet (2).



9. Remove the parking brake cable casing retainer bolt (1).
10. Unclip the parking brake cable.



11. Remove the handbrake cable (1) from the rear brake caliper.

1. Install the parking brake cable (1) to the rear brake calliper.



2. Clip in the parking brake cable (2).

Caution: Refer to Fastener Caution in the Preface section.

3. Install the handbrake cable casing retainer bolt (1) and tighten to 10 N·m (89 lb in).



4. Install the parking brake cable grommet (2).
5. Install the parking brake cable clip (1).



6. Install the parking brake cable (2) to the parking brake cable bracket (3).
7. Install in the parking brake cable (2) to the parking brake lever (1).



8. Install the rear floor carpet (1).
9. Install the centre pillar lower garnish moulding. Refer to Centre Pillar Lower Garnish Moulding Replacement .
10. Install the rear seat cushion. Refer to Rear Seat Cushion Replacement .
11. Install the front floor console. Refer to Front Floor Console Replacement .